MEMORIAL DAY SALE! SAVE 50% USING SALE CODE "MEMORIAL" Free Shipping on all orders over $50.00
 

30W Eleaf iStick Full Kit with OLED Screen MOD Battery - 2200mAh

30W Eleaf iStick or iStick box MOD is an newly launched battery with a fashionable metallic appearance. With a compact size, you can hold that in the palm, much more convenient for usage and portability. Four
bright colors with powerful functions. The highlight is the incremental OLED screen.


Parameters:
Size (length x width x height): 32 x 20 x 77 mm
Color: black, silver, red and blue
Capacity: 2200mAh
Thread Type: 510 Thread
Variable voltage: 2.0V - 8V
Variable wattage: 5W - 30W

Minimum resistance value: 0.4ohm

30W iStick full kit comes with
1 x iStick battery
1 x 510-eGo adapter
1 x AC-USB adapter
1 x Micro USB cable
1 x Manual


Features
1. OLED screen
2. 2200mAh large capacity
3. 30W strong output wattage
4. Adjustable voltage
5. Spring connector
6. Pass-through function
7. High Stability: The output wattage is in high stability. It can
also be up to the high output wattage even in the case of low power.



Switch the VV/VW mode: Press the square button for three times to
switch the VV/VW mode when the battery is turned on. In VV mode, you
can adjust output voltage between 2.0V-8.0V. In VW mode, you can
adjust output wattage between 5W-30W.

Adjust the voltage/wattage: Press the up-and-down arrow buttons to
increase or decrease the voltage/wattage. Keep pressing the up/down
arrow button, voltage/wattage will increase or decrease slowly at
first, then they will increase/decrease at a constant high speed. The
number will stop increasing/decreasing when you loosen the up/down
arrow button.
Lock and Unlock: Keep pressing up-arrow button and down-arrow button
simultaneously for 2 seconds when the battery is on, then they will be
locked and the screen will reflect “Lock”. Still keep pressing
simultaneously for 2 seconds to unlock them and the screen will
reflect “Unlock”. Through these operations, you can protect the
buttons from unintentional presses and prolong their service life.

Switch the display mode: Keep pressing up-arrow button and down-arrow
button simultaneously for 2 seconds when the battery is off, the
screen display will rotate 180 degrees. You can view the screen from
two kinds of angle through this operation.
How to charge: iStick 30W is charged through USB port at the bottom of
battery. It will take 2.5 hours to fully charge the battery via 1A
wall adaptor.
The battery level indicator on the OLED screen will keep flashing
during charging. When fully charged, the indicator will stop flashing
and keep shining for 15 seconds then go out.


It comes with extra an 510-eGo thread, can work with ego/510 threaded
clearomizers/tanks.

Continue Shopping or Checkout